RC Altimeter #3 PRO was designed to provide a lightweight, compact device for measuring and recording altitude, vario, battery voltage, temperature and servo pulse over time to microSD card and to transmit all this parameters to the ground via 433MHz band. The concept is an upgrade from ours old system (RC Altimeter#2 PRO) with better RF module for longer range and different storage memory (microSD card) with bigger memory for longer flights. It was designed specifically for use in onboard radio controlled (R/C) aircrafts, however it is also very useful in many other applications. RC Altimeter #3 PRO provides in real time currently altitude, maximum altitude achieved in flight, vario (climb rate), battery voltage and number of interferences detected directly on the field, via telemetry link on RC T2000 module. With RC GPS module, it will also transmit ground speed, distance from home position (R/C pilot), latitude and longitude and will record all required GPS data (date, latitude, longitude, QNH, HDG and ground speed) to see your flight in 3D with Google Earth or analyze it with special software like SeeYou. Speed graph will be shown on PC if you have RC GPS module connected to it when flying.


Its key features are:

Lightweight at only 12 grams with telemetry and JR cable

Small · 33 mm x 20 mm x 9 mm

With RC T2000 module it will work as variometer with audio tone

Records data to microSD card for later review

64Mb microSD card included for many hours of flying

FXJ switch function integrated

supports 69 channels for telemetry with 25kHz spacing

USB PC interface for firmware updates

Export data to JPG image, KML (Google Earth) file and IGC (SeeYou) files

Accepts wide range of input power: 4 – 20 volts DC. Power it from your aircraft receiver

Every unit is tested in pressure chamber for its accuracy

Transmits measured parameters in real time

With RC GPS module it will:

Transmit additional information as ground speed, distance from R/C pilot, latitude and longitude

Record all GPS data required, so you could later see your flight in 3D with Google Earth or with SeeYou

Manual

For ordering or any additional information please send email at: support@rc-electronics.org